Testing Center

⁰¹ Cyclic fatigue test bench with salt spray option

• Two springs are tested simultaneously with loading cycles counting.
  
  
• Parallel and radial loading modes.
  
  
• Automatic stop at breakage or load change.
  
  
• Remote monitoring.
  
  
• Neutral salt spray.

⁰² Cyclic corrosion chamber

• Effective volume: 1,000 liters.
  
  
• Neutral salt spray mode:
  Temperature range: up to 50 °С.
  Salt spray condensing range: 0,5-3,0 ml over 80 cm² per hour, with 1-20 µm particle size and 2-6 g/m³water content.
  Humidity range: 15-95%RH
  
  
• Air dry mode at max 70°С.
  
  
• Humidity condensing mode at max 100%RH.
  
  
• Set humidity level mode, max 90%RH, at max 60°С.
  
  
• Programmed test procedure – modes, duration, parameters and cyclic repetition may be programmed.

⁰³ Climatic chambers

• Effective volume: 0.5 m³.
  
  
• Temperature range: from -50°С to 95 °С.
  
  
• Temperature deviation with respect to a rated value: ±2 °С.
  
  
• Temperature deviation with respect to a set value: ±1 °С.

⁰⁴Gravelometer

• Adjustable speed of gravel projection.
  
  
• Adjustable speed of sample rotation.
  
  
• Adjustable distance between the gravel projection point and a test sample.

⁰⁵ Salt spray chamber

• Humidity range: 50-98%RH.
  
  
• Effective volume: 0.5 m³.
  
  
• Temperature range: up to 50 °С.
  
  
• Automatic temperature control.
  
  
• Programmable test duration.

⁰⁶ Multipurpose testing machine

• Maximum tensile load: 600 kN.
  
  
• Load measurement tolerance: ±1%.
  
  
• Diameter of a wire to be tested: 11-16 mm.

⁰⁷ Resonance cyclic fatigue testing machine

• Resonance loading with cycles counting.
  
  
• Control system: automatic stop at a sample breakage, remote control.

⁰⁸ Crank-shaft cyclic fatigue testing machine

• Two springs are tested simultaneously with loading cycles counting.
  
  
• Automatic stop at a sample breakage.